Man 04b - Stakeholder Participation (residential)

Independent party - KBCN00058

The client/design team carrying out the consultation/post-occupancy evaluation can demonstrate compliance with the requirement for an independent third party in two ways: 1) An independent third party, not involved in the design or development of the building, has conducted the necessary consultation exercise using a compliant method. 2) If the evaluation is carried out by an organisation involved in the design of the building, evidence demonstrating the party's independence of the design process must be provided. The design team or relevant individual must demonstrate a credible level of independence to meet the requirement.  

---

Lifetime Homes – Accessibility criteria - KBCN1554

The technical manual refers assessors to the Lifetime Homes website, where the Design Guide was available to view. However, it has been brought to our attention that this website is currently unavailable. Unfortunately, due to potential copyright issues, BRE is unable to provide these requirements as part of our criteria. The Lifetime Homes Design Guide is available to purchase from the CAE website, here, or as a PDF download or paper copy from the BRE Bookshop, here

---

Post Occupancy Evaluation – Bespoke - KBCN0678

It is acceptable to use a bespoke POE providing that the assessor is satisfied that the methodology covers all relevant aspects of a compliant POE. The assessor should therefore refer to the further guidance on POE provided in the BREEAM technical manual for information on what a compliant POE methodology should contain, as copied below:

• The BCO guide to Post Occupancy Evaluation (POE), British Council for Offices, 2007
• BRE Digest 478, Building performance feedback: getting started, Building Research Establishment, 2003
• Guide to Post Occupancy Evaluation Report and Toolkit, HEFCE, AUDE & University of Westminster, 2006

---