00 General

Compliance: Applicability of criteria to subsequent schemes’ versions - KBCN0554

When assessing a project under a certain scheme, criteria or compliance notes from a previous scheme cannot be used to demonstrate compliance.

Compliance: Applicability of criteria to scheme’s previous versions - KBCN0430

Criteria set for a scheme version are not applicable retrospectively to previous versions.

Compliance: Statutory requirements - KBCN0395

BREEAM is an assessment method which promotes best practice in sustainable buildings. Matters critical to health and safety, as well as any mandatory requirements from statutory authorities which conflict with BREEAM criteria may take precedence over BREEAM requirements. In this instance, evidence would be required to demonstrate that this is the case. Note, this does not change the criteria requirements, and where BREEAM requirements are not met the design team must explore alternative options or specifications if the relevant credits are to be awarded.

17/04/18 Wording amended to clarify

Confirmation of version / year of technical standards - KBCN0519

When providing evidence of compliance it is important for design teams to clearly refer to the version and / or year of the standard being complied with for an assessment. The issue / release / adoption of standards sets the requirements appropriate at the time of publication of the BREEAM scheme documentation. A standard may be updated in between BREEAM re-issues and updates so the standard cited in the requirements or the most current version of a standard can be applied. This applies to standards such as National (e.g. British) Standards, HTM documents, Environment Agency and Policy Planning Guidelines etc. Where the current version of the standard differs notably from the cited standard in the manual, it is the role of the assessor or design team to verify that it is equivalent or more robust than the original requirement. Evidence failing to demonstrate this will be result in raising of a non-conformance within QA and will delay certification. See also: KBCN0747 Equivalent standard use

23/08/17 Merged with “Superseded standards and evidence referenced” KBCN0453

GN29: Comparing criteria and evidential crossover between BREEAM Communities and building level assessment methodologies - KBCN0987

This document helps clarify the areas where compliance with BREEAM Communities can help to show compliance with criteria at Home Quality Mark (HQM) and BREEAM building level assessments from new construction to refurbishment and fit out. BREEAM Communities scheme offers a strategic approach to assess the environmental, social and economic sustainability of large scaled developments and masterplanning projects. This is the stage and scale where there are opportunities to increase sustainability across the entire site and for individual buildings through economies of scale, site-wide solutions and greater flexibility in design decisions. In turn, when it comes to later lifecycle stages of the development and assessing individual buildings under BREEAM or HQM, these solutions can be used to secure a higher score and rating where relevant. View full Guidance Note (licensed assessors only) View all Guidance Notes (licensed assessors only)

Process Notes - KBCN0611

Process notes can be accessed by licensed assessors here. When a new process note has been released, you may be required to tick the box to confirm you have read the note to be able to access other documents in BREEAM Projects. To do this scroll to the bottom of the Process Note index page and tick the box and click next.

Technical: Location of scheme technical documents - KBCN00022

All scheme technical manuals are available to view and download on the BREEAM website. Click here.. Always refer to the BREEAM website to make sure that you have access to the most up-to-date version of the relevant scheme technical manual.

Tools: Use of reissued tools - KBCN0384

The most up-to-date version of an excel tool should be downloaded from the BREEAM Assessor's Extranet when a new assessment is started. If an updated tool is subsequently released then it will not be necessary to use the updated tool instead of the version already being used. The assessor can choose to use the updated tool if they wish. When new tool versions are released, assessors are notified through the monthly Process Note. We would expect Assessors to review the 'Schedule of Changes' tab when an updated tool is released. If fundamental changes have been made to the tool and they will affect the results for the issue in question please contact BRE for guidance.

Communities / 2012 /