ENE 02 - Energy Efficiency Rating Post Refurbishment

Energy Efficiency Rating (EER) and primary energy demand – SAP 10.2 - KBCN1596

SAP 10.2 may be used to calculate the Energy Efficiency Rating (EER) and Primary Energy Demand. Although the carbon emission and primary energy factors have changed and better reflect actual impacts, there is no change to the baseline EER definition.

---

Minimum standard for listed buildings and buildings in a conservation area - KBCN0207

A report must be produced in consultation with the Conservation Officer to include the fabric report detailing explicit restrictions and demonstrating that energy efficiency measures elsewhere in the building have been maximised. Where minimum standards cannot be met, this must be fully justified. This is needed to justify that as much as possible can be done within the restrictions imposed by the listed status. 

---

SAP box number for the energy efficiency rating (EER) - KBCN1325

The energy efficiency rating (EER) should be taken from box number 258 under section 11a. If the dwellings you are assessing are supplied by community scale CHP please use SAP Box 358 under section 11b

---

SAP box number if community scale CHP is used - KBCN0274

If the dwellings you are assessing are supplied by community scale CHP please use SAP Box 358 under section 11b CHP information is in a separate section of the SAP worksheet

---