3 General Technical /

8 Guidance Notes

Information correct as of 19thJune 2021. Please see kb.breeam.com for the latest compliance information.

GN00 – Guidance Notes link - KBCN0619

To view Guidance Notes on BREEAM Projects click here (Licensed assessors only)

GN01 NC 2011 Assessment Reporting - KBCN0610

Introduction This guidance is intended to clarify the procedure for producing assessment reports for certification using the BREEAM New Construction 2011 assessment scoring and reporting tool and assessment references tab. View full Guidance Note (licensed assessors only) View all Guidance Notes (licensed assessors only)

GN02 BREEAM 2011 Ene 01 - KBCN0614

This guidance note covers various aspects of Ene 01 methodology View full Guidance Note (licensed assessors only) View all Guidance Notes (licensed assessors only)

GN03 Scheme classifications of developments with domestic elements – BREEAM New Construction 2011 - KBCN0615

Scheme classifications of developments with domestic elements - BREEAM New Construction 2011 Introduction This document provides guidance for BREEAM scheme classifications of developments with domestic elements and reflects where buildings consisting of self-contained dwellings and/or rooms for residential purposes are suitable to be assessed under the BREEAM New Construction scheme 2011 version. View full Guidance Note (licensed assessors only) View all Guidance Notes (licensed assessors only)

GN04 BREEAM 2011 Ene 01 Calculation Methodology Review - KBCN0616

Introduction This guidance details the analysis of and subsequent changes made by BRE Global Ltd to the BREEAM New Construction 2011 version of the Ene 01 assessment issue methodology and benchmarks. View full Guidance Note (licensed assessors only) View all Guidance Notes (licensed assessors only)

GN05 Considerate Constructors Scheme and the BREEAM schemes - KBCN0617

Introduction This guidance note applies to all BREEAM UK versions and schemes including New Construction, Domestic Refurbishment and EcoHomes. Up and coming changes to the Considerate Constructors Scheme (CCS) will have an impact on the performance levels required under all schemes and versions of BREEAM, EcoHomes1 and BREEAM Domestic Refurbishment2 i.e. issue Man 02. This guidance note outlines the changes to the CCS and how this will affect BREEAM assessments View full Guidance Note (licensed assessors only) View all Guidance Notes (licensed assessors only)

GN06 Hea 02 Indoor Air Quality Plan – BREEAM UK New Construction 2011 and 2014 - KBCN0618

Introduction It has been shown that poor indoor air quality is linked to health deterioration and poor performance of building occupants 1 and 2. For this reason BREEAM rewards projects that produce an Indoor Air Quality plan (IAQP) which seeks to minimise sources of pollution and optimise indoor air quality. The purpose of this Guidance Note is to provide guidance to assessors and project teams regarding the content and rigour of an Indoor Air Quality Plan (IAQP) as required by the Hea 02 Indoor air quality criteria in the BREEAM New Construction and Refurbishment schemes. It should not be interpreted as BREEAM criteria. It is intended to provide assessors and project teams with further, flexible information and guidance regarding the rigour, content and tasks of an IAQP.” View full Guidance Note (licensed assessors only) View all Guidance Notes (licensed assessors only)
13/02/2019

Updated text to reflect the latest version of this Guidance Note

GN07 – superceded - KBCN0620

GN07 has been superceded

GN08 – Scope of IMPACT compliant tools and data submission requirements - KBCN0621

Scope of IMPACT Compliant (or equivalent) Tools and Data Submission Requirements - BREEAM UK New Construction 2011 and 2014 Introduction This Guidance Note relates to complying with the exemplary level criteria for route 2, as defined under the Mat01 issue of the BREEAM New Construction 2011 and 2014 versions. It provides information about IMPACT and the level of detail (the Quality Requirements) and file transmission requirements for the Building Information Model (BIM) from IMPACT compliant (or equivalent) tools. It also outlines criteria for demonstrating the equivalence of a proposed alternative to IMPACT compliant tools for BRE Global approval. View full Guidance Note (licenced assessors only) View all Guidance Notes (licenced assessors only)

GN09 – BREEAM Bespoke Process - KBCN0622

GN09 has been superseded by GN23 Please refer to KBCN0720 - https://kb.breeam.com/knowledgebase/gn23-breeam-bespoke-process/

GN10 Assessing mixed use developments and multiple buildings (or units) of similar function - KBCN0623

Summary The purpose of this Guidance Note is to assist BREEAM assessors with scheme classifications and the application of BREEAM for mixed use developments and developments with multiple buildings or units on the same site. Note: This guidance note has been revised to v1.0 April 2018 View full Guidance Note (licensed assessors only) View all Guidance Notes (licensed assessors only)
17/04/18 Wording clarified
04/06/18 Note added regarding revision and hyperlink updated

GN11 Considerate construction scheme administrator guidance - KBCN0624

GN11 Organisational, local or national considerate construction scheme requirements: guidance for scheme administrators Introduction The purpose of this guidance note is to provide guidance for considerate construction scheme administrators/operators, against which they can determine whether their scheme is potentially eligible for recognition in BREEAM as a ‘compliant scheme’ and therefore whether performance, as assessed/rated by that scheme, is appropriate for the purpose of awarding BREEAM credits. Where the administrator has reviewed their scheme against the requirements below and wishes to have the schemed listed in BREEAM as a ‘compliant scheme’, they should contact the BREEAM office at BRE Global, providing the following information: 1. A description of the scheme’s operation, including how it monitors and verifies compliance and to what standards it or its assessors are accredited 2. The scheme’s code of practice 3. How the scheme scores/rates contractor and site performance against that code of practice 4. If relevant, the number of projects that have used the scheme and the average score/level of performance achieved. BRE Global will then inform the scheme operator of the next steps in the review and listing process. View full Guidance Note (licensed assessors only) View all Guidance Notes (licensed assessors only)

GN12 Ene 01 – Guidance on the calculation methodology - KBCN0625

The purpose of this guidance note is to describe the calculation methodology used for assessment of the Ene01 Issue. View full Guidance Note (licensed assessors only) View all Guidance Notes (licensed assessors only)

GN13 Relating ecologist’s report and BREEAM - KBCN0626

Introduction This guidance note is to be used for registered BREEAM UK New Construction 2014 and RFO 2014 and International New Construction 2016 and RFO 2015 assessments, where an ecologist has been appointed by the client and has produced an ecology report for the proposed development. The purpose of this guidance note is to help the BREEAM Assessor relate the content of the ecologist’s report to the BREEAM Land Use and Ecology section criteria (assessment issues LE 02, LE 03 (UK only), LE 04 and LE 05). The guidance within this document has been produced to support the assessment of the aforementioned BREEAM issues and should not be interpreted as criteria. If the BREEAM Assessor chooses to use the template provided within this guidance note as evidence in the assessment (use of this document is optional) the assessor or the appointed suitably qualified ecologist must complete all relevant sections View full Guidance Note (licensed assessors only) View all Guidance Notes (licensed assessors only)
01/04/2020 Clarified applicability to UK RFO 2014 and International RFO 2015 schemes

GN14 BREEAM UK New Construction 2014 scheme assessment timeline - KBCN0627

BREEAM UK New Construction 2014 scheme assessment timeline Introduction The assessment timeline has been produced to assist with optimising project sustainability performance. It outlines at which RIBA stage credits should be addressed and ideally when these should be considered by the design team, planner, contractors, owners/occupiers and other members of the project team to achieve the highest possible BREEAM rating at the minimum cost. It demonstrates that where BREEAM advice is taken on too late within the design and construction phases a number of BREEAM credits may not be achieved. View full Guidance Note (licensed assessors only) View all Guidance Notes (licensed assessors only)

GN15 Relating drainage reports to BREEAM - KBCN0629

this KBCN has been superseded. Please refer to KBCN1169.
Superseded 07/09/18

GN16 - KBCN0631

This document is for National Scheme Operators and not applicable to assessors

GN17 Bespoke Green Guide Specifications - KBCN0633

Introduction This Guidance Note provides advice for BREEAM and Code for Sustainable Homes assessors where a Green Guide rating cannot easily be found or matched on the online Green Guide. View full Guidance Note (licensed assessors only) View all Guidance Notes (licensed assessors only)

GN18 BREEAM Recognised Responsible Sourcing Certification Schemes and BREEAM Scheme Applicability - KBCN0723

BREEAM awards credits for responsibly sourcing construction products (typically under the Mat 03 issue) to encourage responsible product specification and procurement in construction. To achieve these credits, applicable specified products (as listed in the relevant technical manual) must be covered by Environmental Management System (EMS) or a responsible sourcing certification scheme (RSCS) recognised by BREEAM. View V3.0 of full guidance note View V2.0 of full guidance note (optional for projects registered prior to release of V3.0) View all Guidance Notes (licensed assessors only)

GN19 BREEAM UK New Construction 2011 scheme assessment timeline - KBCN0716

The assessment timeline has been produced to assist with optimising project sustainability performance. It outlines at which RIBA stage credits should be addressed and ideally when these should be considered by the design team, planner, contractors, owners/occupiers and other members of the project team to achieve the highest possible BREEAM rating at the minimum cost. It demonstrates that where BREEAM advice is taken on too late within the design and construction phases a number of BREEAM credits may not be achieved. View full Guidance Note (licensed assessors only) View all Guidance Notes (licensed assessors only)

GN20 - KBCN0717

GN20 does not exist

GN21 BREEAM UK Refurbishment and Fit-out Ene 01 Methodology - KBCN0718

The purpose of this guidance note is to provide further information on the BREEAM UK Refurbishment and Fit-out (BREEAM RFO) Ene 01 methodology. This note should be read in conjunction with the guidance provided in the UK Refurbishment and Fit-out technical manual View full Guidance Note (licensed assessors only) View all Guidance Notes (licensed assessors only)

GN22 Recognised schemes for emissions from building product - KBCN0719

Within the Health and Wellbeing category of a number of BREEAM schemes, credits are awarded for specifying materials that minimise emissions from building products, e.g. formaldehyde, volatile organic compounds (VOCs). These criteria involve meeting emission level performance requirements in accordance with compliant performance and testing standards. Similar criteria have been included in the Home Quality Mark (HQM) scheme. The purpose of this Guidance Note is to publish a list of schemes that show equivalent or better performance than the current BREEAM and HQM criteria, and therefore can be used to demonstrate compliance with the criteria. This note should be read in conjunction with the relevant assessment issue guidance provided in the appropriate BREEAM scheme or HQM technical manual. View full Guidance Note (licensed assessors only) View all Guidance Notes (licensed assessors only)
12/03/2018 Link to Guidance Note updated
25/01/2019 Link to Guidance Note updated

GN23 BREEAM Bespoke Process - KBCN0720

This document contains information and guidance for BREEAM Assessors who are seeking to assess a bespoke project. This includes projects that meet one of the following options: — A building that does not fit the scope of the BREEAM New Construction and Refurbishment and Fit-Out schemes (UK and International) — A BREEAM Communities project outside of the UK — All BREEAM Infrastructure New Construction pilot projects. This document contains information and guidance for BREEAM Assessors on the operational and technical aspects of the BREEAM Bespoke Process. This document should be used alongside Operational Guidance (SD5070) and the relevant technical manual. View full Guidance Note (licensed assessors only) View all Guidance Notes (licensed assessors only)

GN24 Demonstrating Compliance with BREEAM Issue Mat 03 - KBCN0721

The purpose of this Guidance Note is to provide additional guidance to assessors and specifiers on demonstrating compliance with the criteria set out in Mat 03. It should be read in conjunction with the Technical Manual for the relevant assessment scheme. The following is covered: — Definition of terms used — How to deal with constituent products/materials including those with certification that is different from the overall product — The precision required in estimating quantities: — For the cut-off volume — Of products/materials in the building (route 2 only) — Of different material categories in products/materials. — An example route 2 calculation — ‘Broken chain’ situations — How to treat building services View full Guidance Note (licensed assessors only) View all Guidance Notes (licensed assessors only)

GN25 BREEAM International New Construction 2016 Ene 01 Calc - KBCN0722

A new calculation methodology for determining the number of credits achieved in Ene 01 was introduced in BREEAM International New Construction 2013. The core principles of this methodology have been retained in BREEAM International New Construction 2016, but there have been some changes to the way in which the methodology is implemented. This guidance note describes the main Ene 01 methodology and provides further detail on how it is implemented in the 2016 scheme. View full Guidance Note (licensed assessors only) View all Guidance Notes (licensed assessors only)  

GN28 Home Quality Mark (HQM) Energy and Cost Methodology Guidance Note – Draft - KBCN0768

The purpose of this guidance note is to provide a background to the calculation methodologies underpinning the energy performance section in the HQM ‘Energy and Cost’ issue. The purpose of this guidance note is to provide a background to the calculation methodologies underpinning the energy performance section in the HQM ‘Energy and Cost’ issue. As its name suggests, the HQM is focussed around delivering quality homes. When looking to purchase or rent a new home, consumers look for quality, and also for particular features specific to their needs (e.g. location, size, specification etc.). The HQM standard reflects these needs by promoting a holistic approach to assessing homes and reporting on specific attributes of a home. This enables consumers to make informed decisions and allows developers to showcase and differentiate their product in the marketplace. This document is intended to give a technical background to the calculation methodologies underpinning the HQM ‘Energy and Cost’ issue for end users (e.g. assessors, consultants or others) needing to make decisions influencing a home’s HQM score of the issue. It explains how the methodology works, the HQM inputs required and each of the outputs generated. It also provides guidance on how variations in the input (i.e. SAP inputs, ‘bolt-on’ inputs etc.) affect the outputs. The principles of the calculation methodologies used in the Energy and Cost assessment issue are in keeping with the above. Three measures have been incorporated into the issue to assist in meeting the above aims: • Adoption of the ‘triple metric’ approach – this calculation methodology is used to calculate the Home Energy Performance Ratio (HEPR). This ensures a balanced approach when considering the fabric performance, systems efficiency and CO2 emissions of the home. • Introduction of a cost output – this will allow consumers to compare predicted regulated energy costs and identify specified systems that may perform well environmentally, but be more costly to run. • Introduction of rigour routes – this enables recognition of measures taken to improve the accuracy of the energy calculations. This guidance document looks into the detail of the calculation methodologies for each of the above three measures. In particular it looks into: • The HQM energy calculation engine – the basis of the engine which is used to calculate credits regarding energy performance (and high temperature – see other guidance note), and information on how it works. • Bolt-on calculations – several new elements have been added to the Building Research Establishment Domestic Energy Model (BREDEM1 ) methodology to improve the accuracy of the calculations; the required inputs and methodologies for each of these ‘bolt-on’ calculations are discussed in more detail View full Guidance Note (licensed assessors only) View all Guidance Notes (licensed assessors only)

GN29: Comparing criteria and evidential crossover between BREEAM Communities and building level assessment methodologies - KBCN0987

This document helps clarify the areas where compliance with BREEAM Communities can help to show compliance with criteria at Home Quality Mark (HQM) and BREEAM building level assessments from new construction to refurbishment and fit out. BREEAM Communities scheme offers a strategic approach to assess the environmental, social and economic sustainability of large scaled developments and masterplanning projects. This is the stage and scale where there are opportunities to increase sustainability across the entire site and for individual buildings through economies of scale, site-wide solutions and greater flexibility in design decisions. In turn, when it comes to later lifecycle stages of the development and assessing individual buildings under BREEAM or HQM, these solutions can be used to secure a higher score and rating where relevant. View full Guidance Note (licensed assessors only) View all Guidance Notes (licensed assessors only)

GN30 BREEAM International New Construction 2016 scheme assessment timeline - KBCN0988

The assessment timeline has been produced to assist with optimising project sustainability performance. It outlines at which stage credits should be addressed and ideally when these should be considered by the design team, planner, contractors, owners/occupiers and other members of the project team to achieve the highest possible BREEAM rating at the minimum cost. It demonstrates that where BREEAM advice is taken on too late within the design and construction phases a number of BREEAM credits may not be achieved. View full Guidance Note (licensed assessors only) View all Guidance Notes (licensed assessors only)

GN31 BREEAM UK Non-Domestic Refurbishment and Fit-out 2014 scheme assessment timeline - KBCN0989

The assessment timeline has been produced to assist with optimising project sustainability performance. It outlines at which RIBA stage credits should be addressed and ideally when these should be considered by the design team, planner, contractors, owners/occupiers and other members of the project team to achieve the highest possible BREEAM rating at the minimum cost. It demonstrates that where BREEAM advice is taken on too late within the design and construction phases a number of BREEAM credits may not be achieved. Due to the nature of Refurbishment and Fit-Out works, some projects may have short timescales and considerable overlap between stages. This can mean that some actions will have to be completed at a later RIBA stage than indicated in this document. However, it is important to consider that early decisions can create opportunities and barriers that impact on the ability of project teams to meet BREEAM requirements at a later stage in the project by limiting design and/or specification choices. This may apply to a number of issues in the assessment timeline below. The use of a yellow/ orange colour grading in this document is intended to indicate the ‘ideal time’ for assessors to complete evidence. View full Guidance Note (licensed assessors only) View full Guidance Note (also publicly available on breeam.com) View all Guidance Notes (licensed assessors only)

GN32 Energy Prediction and Post Occupancy Assessment - KBCN1096

The purpose of this Guidance Note is to describe the energy performance prediction and subsequent post occupancy monitoring methodology. This Guidance Note relates specifically to the Prediction of operational energy consumption criteria (4 credits) and the Post-occupancy stage criteria (2 exemplary credits) within BREEAM New Construction 2018. View full Guidance Note (licensed assessors only) View all Guidance Notes (licensed assessors only)

GN33: BREEAM and HQM Responsible Construction Management - KBCN1215

BREEAM awards credits for responsible construction management to recognise and encourage construction sites which are managed in an environmentally and socially considerate, responsible and accountable manner. These credits can be achieved through achieving the items as specified in the relevant criteria and table 1. As an alternative, this process can be simplified by demonstrating formal certification of compliance with one or more of the schemes / tools recognised by BREEAM View full Guidance Note (licensed assessors only) View all Guidance Notes (licensed assessors only)

GN34: BREEAM, CEEQUAL and HQM Ecology Risk Evaluation Checklist - KBCN1220

This guidance note is applicable for BREEAM, CEEQUAL and HQM schemes used in the UK which opened for registrations from 2018 onwards. Where the term Assessor is used in this document this refers to the BREEAM, CEEQUAL, HQM Assessor as relevant to the assessment taking place. View full Guidance Note (licenced assessors only) View full Guidance Note (also publicly available on breeam.com) View all Guidance Notes (licensed assessors only)

GN35: BREEAM UK New Construction 2018 Ecology Assessment – Route 1 Methodology - KBCN1221

Applicability of this Guidance Note This guidance note is applicable to BREEAM UK New Construction 2018. The relevance of this document to a project undergoing an assessment under this scheme is dependent on the version of the scheme being used. Reference should be made to the scheme Technical Manual to determine this. Where there is no reference to this document, the method set out here is not relevant and cannot be used to demonstrate compliance with the assessment criteria in those versions of those schemes. Where the term Assessor is used in this document this refers to the BREEAM Assessor. This Guidance Note is only applicable to projects undergoing assessment of Ecology issues under Route 1 (See below for further details) Purpose and Scope of this Guidance Note This guidance note provides guidance on the methodology to be adopted by Route 1 assessments for each of the core assessment issues relating to ecology. It forms a part of the technical manual, which means the methodology and process described are an integral part of these scheme requirements. There are four core assessment issues within the UK New Construction scheme which relate to ecology: LE 02 Identifying and understanding the risk and opportunities for the project LE 03 Managing negative impacts on ecology LE 04 Change and enhancement of ecological value LE 05 Long term ecology management and maintenance There are two assessment routes that can be used to achieve credits in these core ecology issues across relevant schemes: View full Guidance Note (licenced assessors only) View full Guidance Note (also publicly available on breeam.com) View all Guidance Notes (licensed assessors only)

GN36: BREEAM, CEEQUAL and HQM Ecology Calculation Methodology – Route 2 (including appendix C) - KBCN1256

1.1 Applicability of this Guidance Note to the BREEAM Family of Schemes (BREEAM, CEEQUAL, HQM) This guidance note is applicable for BREEAM, CEEQUAL and HQM schemes used in the UK which opened for registrations from 2018 onwards. The relevance of this document to a project undergoing an assessment under any of these schemes is dependent on the version of the scheme being used. Reference should be made to the scheme Technical manual to determine this. Where there is no reference to this document, the method set out here is not relevant and cannot be used to demonstrate compliance with the assessment criteria in those versions of those schemes. Where the term Assessor is used in this document this refers to the BREEAM, CEEQUAL or HQM Assessor as appropriate. 1.2 Purpose and Scope of this Guidance Note This guidance note sets out the calculation methodology and process used within the above schemes for the purpose of calculating a ‘change in ecological value’ resulting from the project being assessed. It forms a part of the technical manual for these schemes and as such the methodology and process described forms an integral part of these scheme requirements. There are four core assessment issues which relate to ecology: • Identifying and understanding the risk and opportunities for the project • Managing negative impacts on ecology • Change and enhancement of ecological value • Long term ecology management and maintenance The methodology and process set out in this document must be carried out by a Suitably Qualified Ecologist (see the ‘Identifying and understanding the risks and opportunities for the project’ assessment issue for the definition of a Suitably Qualified Ecologist). It is used to calculate the change in ecological value resulting from a project for the purposes of the Assessment. This methodology is directly relevant for calculating change in ecological value and therefore is an integral part of the ‘Change and Enhancement of Ecological Value’ assessment issue. However it is also relevant for other issues and appropriate stages must be considered as part of the ‘Identifying and understanding the risks and opportunities for the project’ assessment issue. The considerations and outputs generated from the methodology set out in this guidance note will also inform the assessment and achievement of the following issues or their equivalents: • Managing negative impacts on ecology • Long term ecology management and maintenance See the relevant assessment issue in the appropriate technical manual. The outputs of this calculation are used by the Assessor to determine the reward (e.g. credits/points) available for the ‘Change and Enhancement of Ecological Value’. It forms part of the assessment route 2 in ecology related assessment issues. This route is defined as follows: 1.3 Route 2: For Sites Where Complex Ecological Systems are Likely to be Present This is the more comprehensive route of assessment and as such can achieve a higher level of reward than Route 1 (See GN 34: BREEAM CEEQUAL and HQM Ecology Risk Evaluation Checklist for a definition of Route 1 and details of when it can be applied). Route 2 results in a higher potential overall reward and as such is better able to provide recognition for project teams’ actions and project outcomes under an Assessment. The methodology outlined in this document does not apply to assessments being assessed under Route 1. View full guidance note (publicly available on breeam.com) GN36 Appendix C (publicly available on breeam.com) View full guidance note (licensed assessors only) GN36 Appendix C (licensed assessors only) View all Guidance Notes (licensed assessors only)

GN37: BREEAM UK New Construction 2018 scheme assessment timeline - KBCN1262

The assessment timeline tables included in the summary page of each category in the UK New Construction 2018 scheme manual have been reproduced in this Guidance Note. The timeline has been produced to assist with optimising project sustainability performance. It outlines at which stage credits should be addressed and ideally when these should be considered by the design team, planner, contractors, owners, occupiers and other members of the project team to achieve the highest possible BREEAM rating at the minimum cost. It demonstrates that where BREEAM advice is taken on too late within the design and construction phases a number of BREEAM credits may not be achieved or only at additional cost or disruption. View full Guidance Note (licensed assessors only) View all Guidance Notes (licensed assessors only)  

GN39 BREEAM UK NC 2018 Ene 01 Calculation Methodology - KBCN1098

The purpose of this guidance note is to describe the calculation methodology for the energy performance criteria (up to 9 credits) under the Ene 01 issue of the BREEAM UK New Construction 2018 scheme. View full Guidance Note (licensed assessors only) View all Guidance Notes (licensed assessors only)

GN40 BREEAM, CEEQUAL, HQM Ecology Assessment Issues Reporting Template - KBCN1190

Purpose and Scope of this Guidance Note The purpose of this guidance note is to help the Assessor relate the information generated during the project to the BREEAM, CEEQUAL or HQM ecology assessment issues in the scheme being used for assessment. The guidance in this document has been produced to support the assessment of these issues and should not be interpreted as criteria. Use of this document as a template is optional. If the Assessor chooses to use the template provided within this guidance note as evidence in the assessment the Assessor, project team member or the appointed Suitably Qualified Ecologist must complete all relevant sections. The completed document can then be used by the Assessor along with all relevant project documentation to demonstrate compliance with the BREEAM, CEEQUAL or HQM criteria. View full Guidance Note (licensed assessors only) View all Guidance Notes (licensed assessors only)

Guidance Note 35 withdrawn - KBCN1355

Guidance Note 35 has been withdrawn following the publication of v3.0 of the BREEAM UK New Construction 2018 Technical manual.  This manual reissue includes all of the information contained in this guidance note in a revised form and supersedes the GN content.  As such the GN should not be used for assessment purposes and it has been archived.  A copy can be downloaded if required for archive purposes only. Please see KBCN1221 regarding the original Guidance Note 35.

Guidance Note 40 to be updated - KBCN1356

Following the publication of v3.0 of the BREEAM UK New Construction 2018 Technical manual, the wording in Guidance Note 40 differs to some degree from that in the manual.  However, the underlying content is the same and the form may still be used to provide evidence for assessments.  Alternatively, it may be used to guide the preparation of evidence in a different format if preferred.  This GN will be updated to fully correspond to the wording in the reissued manual. Please see KBCN1190 regarding the purpose and scope of Guidance Note 40.

Relating drainage reports to BREEAM – GN15 and GN38 - KBCN1169

The purpose of these guidance notes is to help assist BREEAM assessors relate the contents of drainage reports to the ‘Surface water run-off’ and ‘Minimising watercourse pollution’ criteria in Pol 03. They do not cover the criteria for the ‘Flood resilience’. We have published two separate Guidance Notes because there are small, but significant, differences between the criteria in the two schemes. This means that the Guidance Notes are not interchangeable; GN15 can only be used for the assessment of BREEAM UK New Construction 2014. GN38 can only be used for the assessment of BREEAM UK New Construction 2018. Note: Completing either template is optional. They are aids for demonstrating compliance and are not a requirement. View GN15 here and GN38 here. (licensed assessors only) View all Guidance Notes (licensed assessors only)

Reward Scale for UKNC LE04 - KBCN1376

Guidance Note 36 outlines a rewards scale (table 9) for the credits awarded in LE04, Ecological Change and Enhancement. Table 9 breaks down the credits into 4 sections:
  1. Minimising loss
  2. No net loss
  3. Net Gain
  4. Significant net gain
For UKNC 2018, sections 1-3 correspond to the 3 credits awarded when a project follows the comprehensive route. Exemplary level credits are given if section 4 is achieved.    
Information correct as of 19thJune 2021. Please see kb.breeam.com for the latest compliance information.